Hallo, ich habe ein AIM LAMBDA Controller und möchte die Werte gerne in die S60 eingeben. Hat zufällig die Werte dafür?
Und die Werte für diesen Sensor? Bosch Motorsport Flüssigkeitsdruck und Temperatursensor
m10x1.0-Thread
bosch Teile-Nr.: 0261230340
pin2: Drucksignal (0,5 V = 0bar, 4,5 V = 10bar)
PIN3: + 5V Sensorvorrat
PIN4: Sensor GND
Pin5: Temperatursignal (0,5 V = -40 ° C, 4,5 V = 140 ° C c)
Und für ein Kühlmittel Sensor Bosch blau ?
Und einen Benzindrucksensor Werte:
0.5v = 0 bar
4.5v = 10 bar.
Grüße Felix
Sensor Eingabe S60 .
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Sensor Eingabe S60 .
This ? just looks like an Innovate LC-1 really
https://www.aimsports.com/download/doc/ ... 02_eng.pdf
You already have the values for the pressure sensor ? Just enter them
Temperature probably just standard Bosch NTC, same as for the blue sensor you refer to. Just select the Bosch sensor on the list.
https://www.bosch-motorsport-shop.com.a ... 0710031014
https://www.aimsports.com/download/doc/ ... 02_eng.pdf
You already have the values for the pressure sensor ? Just enter them
Temperature probably just standard Bosch NTC, same as for the blue sensor you refer to. Just select the Bosch sensor on the list.
https://www.bosch-motorsport-shop.com.a ... 0710031014
-
- Posts: 16
- Joined: Tue May 09, 2023 11:35 am
- ECU Model: S60 Pro
Re: Sensor Eingabe S60 .
Hallo, vielen Dank.
Grüße Felix
Grüße Felix