N75 Parameter !

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
paco972
Posts: 11
Joined: Wed Dec 14, 2011 8:43 pm
ECU Model: S80 Pro
Firmware Version: 62

N75 Parameter !

Post by paco972 »

Hello !

I need more info about N75 Control on Dta S series ecu my N75 is wired but how to control it ? i need configuration info for this and boost setting with 20*14 Map !
thanks
VR6T 3.0L PT6262,Schimel Intake , Msd coil pack, 02M 6 Spd , Spec Triple Disc , DTA S80 And more & more !
VR6Turbo
Posts: 329
Joined: Wed Mar 17, 2010 9:24 am
ECU Model: S80 Pro
Firmware Version: 62

Re: N75 Parameter !

Post by VR6Turbo »

You would get better luck with this valve - http://www.efi-parts.co.uk/index.php?productID=222

I tried the N75 on my VR6 Turbo and couldn't get it to behave nicely.

Or an external boost controller like the IBC-R is very good.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: N75 Parameter !

Post by stevieturbo »

paco972 wrote:Hello !

I need more info about N75 Control on Dta S series ecu my N75 is wired but how to control it ? i need configuration info for this and boost setting with 20*14 Map !
thanks

Is this a serious question ?

There are 2 wires. 12v, and an ecu trigger. It really doesnt get much simpler

And you build your own 20x14 map by trial and error. There is NO other way, as there are far far too many variables.

Solenoid frequency will likely be around 20-30hz
User avatar
86sixsix
Posts: 139
Joined: Fri Aug 05, 2011 8:01 am
ECU Model: S40 Pro
Distributor: http://www.dtafast.co.uk
Firmware Version: 78.01
Location: A cold garage / Sideways 'round cascades
Contact:

Re: N75 Parameter !

Post by 86sixsix »

^20hz is sweet as on a n75 j flavour
Renault 1.6 K7M, '92 Clio 16v shell, Rotrex C30-74, S40, Faceache, Sh***er, YouTube Blue Shed Channel
Post Reply