S Dash

Discuss issues and tuning software like DTASWin, E-Race, MegaLogViewer(DTA), etc. Also post archive versions of firmware.
SLEI
Posts: 6
Joined: Sun Jan 29, 2012 9:20 am
ECU Model: No ECU

Re: S Dash

Post by SLEI »

How much these cost and is there high quality pictures of the latest modell somewhere ?

When the bigger screen modells are ready?
pro2call
Posts: 36
Joined: Sat Jul 21, 2012 12:33 am
ECU Model: S40 Pro
Distributor: Mefmotorsport
Firmware Version: 77
Location: The Netherlands
Contact:

Re: S Dash

Post by pro2call »

I found a couple of picture's of this display.

Image
Image
Image
Image
Image
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: S Dash

Post by Roverdose »

so ive finally got my engine running and kind of have the display mounted.
ecu is detected but no data stream.

found a tick box in the software for data stream.

do i need to add anything in the rest of the boxes to get this working properly?
number of header bytes etc?

cheers
Drew
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: S Dash

Post by Roverdose »

im obviosly missing something, tick box checked, still nothing.

Drew
Simon P.
Posts: 96
Joined: Sat Nov 12, 2011 6:24 pm
ECU Model: S100 Pro
Firmware Version: 61
Location: Montreal, Canada

Re: S Dash

Post by Simon P. »

Roverdose wrote:im obviosly missing something, tick box checked, still nothing.

Drew
Hey Drew,
I just plugged mine in a few weeks ago, haven't had anytime to mess with it...
Did you get this opening screen when it powered-up?

Simon
Attachments
IMG_4049.JPG
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: S Dash

Post by Roverdose »

simmilar but not the same, ill go take a pic.

btw it recognises the ecu type and the map i have in there, just no stream.

Drew
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: S Dash

Post by Roverdose »

on ignition i get this...

Image

doesnt chage with the engine running, change the mode, no difference.

searched the net, setting up an aim display says you need
2 (in header bytes)
208
208 (in the next 2 boxes)

will try that in a mo.

cheers
Drew
MarcoV6T
Posts: 101
Joined: Tue Jul 26, 2011 12:20 pm
ECU Model: S80 Pro
Firmware Version: 58

Re: S Dash

Post by MarcoV6T »

Roverdose wrote:found a tick box in the software for data stream.

do i need to add anything in the rest of the boxes to get this working properly?
number of header bytes etc?

cheers
Drew
Actually, yes, for serial stream you need the following;
Number of header bytes: 4
Header bytes values: 170-85-1-254-0-etc.

But I see that you still have the old firmware, for the advanced stream(old dyno stream), you’ll need to upgrade to the newer firmware(to make it work with the later DTA firmware), I’ll send you a few files with the newer firmware and how to upgrade.
Roverdose
Posts: 318
Joined: Tue Aug 09, 2011 2:54 pm
ECU Model: S80 Pro
Distributor: Roverdose
Location: Stevenage
Contact:

Re: S Dash

Post by Roverdose »

thank you Marco.

im on v58 atm, might upgrade that later.

cheers
Drew
MarcoV6T
Posts: 101
Joined: Tue Jul 26, 2011 12:20 pm
ECU Model: S80 Pro
Firmware Version: 58

Re: S Dash

Post by MarcoV6T »

Then you'll need the update.

I've send you the files.
Post Reply