(I did not find something similar so...)
I would like to request, in a later version of software, to be possible to regulate the turbo pressure through the air temperature in order to achieve operation of modern turbo engines. (or like modern turbo engines do)
A simple function that works as a blanket over the "Target pressure" map.
Let's say that there is simple one column or two row table with specified temperatures and percentage (%) that can be added or removed in order to achieve higher or low turbo pressure.
Regards
George.
I would like to request from DTA ...
-
- Posts: 44
- Joined: Thu Mar 07, 2013 12:06 pm
- ECU Model: S60 Pro
- Distributor: Local Dealer GR
- Firmware Version: 62
I would like to request from DTA ...
Last edited by Page on Thu Mar 07, 2013 6:40 pm, edited 2 times in total.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: I would like to request from DTA ...
Bit of a language barrier.
But I think you're asking for a engine coolant temperature based boost limit. Or perhaps also a reduced rpm limit based on engine temperature.
I would agree that both would be worthwhile features.
But I think you're asking for a engine coolant temperature based boost limit. Or perhaps also a reduced rpm limit based on engine temperature.
I would agree that both would be worthwhile features.
Re: I would like to request from DTA ...
Why do people ask for things from DTA on this forum when the forum clearly has nothing to do with DTA.
You would have to email them directly to get anything sorted, good luck with that one..
You would have to email them directly to get anything sorted, good luck with that one..
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: I would like to request from DTA ...
Because it is a public forum. When the product is in the public domain, what is wrong with people expressing their views and thoughts on useful features, which can be debated by others ?Antral wrote:Why do people ask for things from DTA on this forum when the forum clearly has nothing to do with DTA.
You would have to email them directly to get anything sorted, good luck with that one..
Some might be useless, some useful. But until the ideas are out there, maybe there would be some stroke of genius idea too that just needs refined.
If everyone kept their ideas a secret, development for what customers might never happen at all.
Forums are a great user resource not only for existing customers, but potential customers, and in general should be embraced by the manufacturers.
And I'm sure someone from DTA takes a peek on the odd occasion. How could they resist all these wonderful people and their flying machines
Oh...and while we're on the topic...lets not forget this thread
viewtopic.php?f=5&t=265
-
- Posts: 44
- Joined: Thu Mar 07, 2013 12:06 pm
- ECU Model: S60 Pro
- Distributor: Local Dealer GR
- Firmware Version: 62
Re: I would like to request from DTA ...
Sorry for my language mistakes . I tried to correct my post.stevieturbo wrote:Bit of a language barrier.
But I think you're asking for a engine coolant temperature based boost limit. Or perhaps also a reduced rpm limit based on engine temperature.
I would agree that both would be worthwhile features.
(please have a look ... again )
You are asking me? Stevieturbo has the answer.Antral wrote:Why do people ask for things from DTA on this forum when the forum clearly has nothing to do with DTA.
You would have to email them directly to get anything sorted, good luck with that one..
However, it is certain that if I send e-mail to DTA and ask what i want ...
I will definitely need a lot of luck.
So if you believe that it is useless and fills the server with junk !
Then, clearly, moderators can erase the thread .
thks .
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: I would like to request from DTA ...
emails cost nothing, so by all means email DTA with the request.
I have done so in the past and some features I asked for were added. So they do listen ( to some requests ) lol
And your English is better than any other languages I know ! Just like to be very specific about what is being asked.
I have done so in the past and some features I asked for were added. So they do listen ( to some requests ) lol
And your English is better than any other languages I know ! Just like to be very specific about what is being asked.
-
- Posts: 44
- Joined: Thu Mar 07, 2013 12:06 pm
- ECU Model: S60 Pro
- Distributor: Local Dealer GR
- Firmware Version: 62
Re: I would like to request from DTA ...
You know ! ! ! I've got your point here . Where do i contact Alan ( i believe).stevieturbo wrote:emails cost nothing, so by all means email DTA with the request.
I have done so in the past and some features I asked for were added. So they do listen ( to some requests ) lol
And your English is better than any other languages I know ! Just like to be very specific about what is being asked.
I'll do my request and see what happens . As you said it costs nothing .
Off topic ...
So Okay Antral you're right but please mate don't be so aggressive.
You are hurting people when you start your sentance with "Why people"
On topic ...
Why don't you ask me what can we achieve with this? Let's have a chat about it ...
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: I would like to request from DTA ...
If you are not all ready using the the Gear PWM Modifier (in turbo settings) you could use this with an additional air temperature sensor and pull up resistor on the ANA 3 input or try coupling the existing air sensor to ANA 3
-
- Posts: 44
- Joined: Thu Mar 07, 2013 12:06 pm
- ECU Model: S60 Pro
- Distributor: Local Dealer GR
- Firmware Version: 62
Re: I would like to request from DTA ...
Oh ... Oh ...Oh ! ! ! Could you please be more specific ?Rob Stevens wrote:If you are not all ready using the the Gear PWM Modifier (in turbo settings) you could use this with an additional air temperature sensor and pull up resistor on the ANA 3 input or try coupling the existing air sensor to ANA 3
No i am not using the Gear PWM Modifier. In Fact i haven't started yet and i do not intend to use Gear Modifier.
I'm on drawings right now and in a couple of weeks i am starting my little project.
Okay, i 'll get my self a new air sensor (bosch 0280 130 039) and wired up to GND Sensor 33 pin and Ana 3/ Gear Pot .
And ...
Re: I would like to request from DTA ...
I would like an USB port, and maybe an android compatible DTASwin.