Hello to every one in the forum. I am from Greece and I use the above ecu. I am tunning my car myself along with 3 other cars and I have a problem with the 2 maps. I connected the 2 map switch, I checked it on diagnostics that it works, I checked the box that says map2 always active when switch on but the ecu won't go to map 2 active... Any suggestions?
Fuel and ignition maps are copied from map1 and I want to use the second map for race fuel and more pressure.
Dta s60 pro second map activation
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Dta s60 pro second map activation
It will only switch to MAP2 when the engine is running. Silly, but that's how it is.
So if you test with the engine off, but ignition on....it will not go to MAP2
So if you test with the engine off, but ignition on....it will not go to MAP2
-
- Posts: 29
- Joined: Fri Jan 20, 2012 6:56 pm
- ECU Model: S60 Pro
Re: Dta s60 pro second map activation
And how to upload the MAP2 before turn the engine for the first time?
For example, I already have the engine running with map1, and if I switch to map2 how can the engine continue running if I did not upload the file from computer to the ECU?
For example, I already have the engine running with map1, and if I switch to map2 how can the engine continue running if I did not upload the file from computer to the ECU?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Dta s60 pro second map activation
MAP1 and MAP2 refer to the two sets of fuel and spark tables, and a few other tables like boost control etc.
If you're saying the engine still runs, when you have MAP2 activated, but there are no numbers at all in the MAP 2 tables...something is wrong. Most likely MAP2 has not activated.
If you're saying the engine still runs, when you have MAP2 activated, but there are no numbers at all in the MAP 2 tables...something is wrong. Most likely MAP2 has not activated.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Dta s60 pro second map activation
There are buttons to copy the fuel and ignition settings from map 1 to map 2. Use those to get it running, and then alter from there.Marcio Leal wrote:And how to upload the MAP2 before turn the engine for the first time?
For example, I already have the engine running with map1, and if I switch to map2 how can the engine continue running if I did not upload the file from computer to the ECU?
The other screens for the turbo settings you have to fill in manually. If you are using a turbo, you MUST fill these in, or the engine won't run.
- mefmotorsport
- Posts: 543
- Joined: Mon Aug 01, 2011 6:45 am
- ECU Model: S100 Pro
- Distributor: Mefmotorsport
- Firmware Version: 79
- Location: Merseyside
- Contact:
Re: Dta s60 pro second map activation
Map 2 is just an edited version of Map 1, it doesnt get stored as a different name, its just a modified version to suit different conditions, situations etc. As Alex says, you must complete all relevant fields. If all the values are the same then changing from map1 to map2 will not make any difference, its the same map!