Re: Big throttle body how much resolution can i use?
Posted: Thu Jul 14, 2016 2:13 pm
I Knob box is Sooooo much easier. Defo worth the money!!
Live adjustment i meant .
It should have a reset button.
DTAForum.com - a forum for the DTA ECU
A forum for DTA users
http://dtaforum.com/
Big throttle body how much resolution can i use?
Page 2 of 2
Re: Big throttle body how much resolution can i use?
Posted: Fri Jul 15, 2016 2:50 am
Re: Big throttle body how much resolution can i use?
Posted: Fri Jul 15, 2016 3:30 am
Page 9: http://www.dtafast.co.uk/download_files ... Manual.pdf
Code: Select all
F1 Help F2 Copy F3 Paste F4 Exit and store changes to engine F5 Manipulate highlighted cells IN 20 x 14 Main Maps Alt Up Arrow Nudge Cell to Higher Value Alt Down Arrow Nudge Cell to Lower Value Alt Page Up Coarser Nudge Cell to Higher Value Alt Page Down Coarser Nudge Cell to Lower Value OTHER KEYS CURSOR KEYS Move about maps [b]IN REAL TIME MAPPING[/b] Shift F7 Ignition+ Cntrl F7 IgnitionShift F8 Fuel + Cntrl F8 FuelCntrl P Knobs on/off (toggle) Cntrl C Knobs coarse/fine Cntrl K Stop Engine Cntrl I Interp on/off F6 Send Traced Cells to ECU F7 Cam 1 target on left Dyno Box Knob F8 Cam 2 target on right Dyno Box Knob
Re: Big throttle body how much resolution can i use?
Posted: Fri Jul 15, 2016 7:36 am
Il continue to typ i cells then .
Been on the road for 30 mins now . And its starting to run
Really good .
Most typeing time spent on the low end as its impossible
To keep steady rpm with auto trans and 2500 rpm stall.
Lambda working so good there should be a auto tune button
Otherwise im really happy with the dta ecu.
my first efi install and its working!
Only downside that i couldnt get the cop to work so i hade to run the dizzy
I work in a machine shop so i did the trigger wheel and mods to
The intake my self
Some cleaning and rewireing needs in the enginebay but its
Still in beta version
Been on the road for 30 mins now . And its starting to run
Really good .
Most typeing time spent on the low end as its impossible
To keep steady rpm with auto trans and 2500 rpm stall.
Lambda working so good there should be a auto tune button
Otherwise im really happy with the dta ecu.
my first efi install and its working!
Only downside that i couldnt get the cop to work so i hade to run the dizzy
I work in a machine shop so i did the trigger wheel and mods to
The intake my self
Some cleaning and rewireing needs in the enginebay but its
Still in beta version
Re: Big throttle body how much resolution can i use?
Posted: Fri Jul 15, 2016 7:42 am
The car it self.
Re: Big throttle body how much resolution can i use?
Posted: Fri Jul 15, 2016 9:23 am
New question
Why lambda lock ?
When i drive around i get lambda lock at a certain
Throttle movement. Its just when the car acelerate wery slowly.
Just a little more than maintaining speed
Why lambda lock ?
When i drive around i get lambda lock at a certain
Throttle movement. Its just when the car acelerate wery slowly.
Just a little more than maintaining speed
Re: Big throttle body how much resolution can i use?
Posted: Fri Jul 15, 2016 11:45 am
This is when the ecu is seeing an engine overrun, the lock is timed. Read the instructions as there is a setting in the Lambda section.
As I understand it the lambda needs to be turned off in certain situations like overrun and sudden acceleration
As I understand it the lambda needs to be turned off in certain situations like overrun and sudden acceleration
Re: Big throttle body how much resolution can i use?
Posted: Fri Jul 15, 2016 4:04 pm
As above, under certain conditions you do not want lambda to try and "correct" things...which do not need corrected.
With that crank wheel, there is no reason COP shouldnt easily work.
With that crank wheel, there is no reason COP shouldnt easily work.