DTAForum.com - a forum for the DTA ECU

Quick question hopefully someone can verify the wiring I need to do.

My S60 DTA loom has a lambda section pre-fitted, which has Red, Black & Blue cables.

I'm fitting a PLX AFR controller, and the wiring instructions are fairly clear, but I'm not sure if I should be using the DTA Red & Black wires?

Thanks for any help.

Use the red for the PLX power, black for the PLX ground, and blue for the ECU signal. No need to add anything further.

Perfect Alex.

Didn't want to risk the power draw being more than the DTA catered for without checking.