Page 2 of 2
Re: Question with pretty much every sensor...
Posted: Fri Feb 17, 2017 5:19 am
by Rob Stevens
Coil1 - 1 and 6 cylinder
Coil2 - 3 and 5 cylinder
Coil3 - 4 and 7 cylinder
Coil4 - 2 and 8 cylinder
Re: Question with pretty much every sensor...
Posted: Fri Feb 17, 2017 5:37 am
by Lynx
My mistake...
Coil1 - 1 and 6 cylinder
Coil2 - 3 and 5 cylinder
Coil3 - 4 and 7 cylinder
Coil4 - 2 and 8 cylinder
That would fire 12341234 as it should be according to manual...
That means...
Coil1 - firing 1 and 6 cylinder - bang in 1
Coil2 - firing 3 and 5 cylinder - bang in 5
Coil3 - firing 4 and 7 cylinder - bang in 4
Coil4 - firing 2 and 8 cylinder - bang in 8
Coil1 - firing 1 and 6 cylinder - bang in 6
Coil2 - firing 3 and 5 cylinder - bang in 3
Coil3 - firing 4 and 7 cylinder - bang in 7
Coil4 - firing 2 and 8 cylinder - bang in 2
That would satisfy firing order 15486372 but that still remains a misyery if it is that simple to adjust firing coils 1234 and instead of 5678 firing once more 1234...
Re: Question with pretty much every sensor...
Posted: Fri Feb 17, 2017 6:08 am
by Lynx
What type of pin is for dta connector cause I did not get some with ecu cause i bought used...
What to search for? Any code or something? Both connectors are ok
Re: Question with pretty much every sensor...
Posted: Fri Feb 17, 2017 12:27 pm
by stevieturbo
Firing order is 15486372
Coil output 1 = 1/6
Coil output 2 = 5/3
Coil output 3 = 4/7
Coil output 4 = 8/2
Now depending exactly what coils you are using...if you had one coil per cylinder you could carry on and use all 8 outputs then select twin spark in the software.
But I think you suggested yours is 1 coil per pair of cylinders ? but only 1 trigger wire per coil ?
Re: Question with pretty much every sensor...
Posted: Fri Feb 17, 2017 12:29 pm
by stevieturbo
ECU connectors are listed in the manual I think.
But same as Link, Motec, Haltech etc etc
Martin at MEF Motorsport can supply, or indeed Alex at DTA.
Re: Question with pretty much every sensor...
Posted: Fri Feb 17, 2017 12:33 pm
by katana
or RS Components
Re: Question with pretty much every sensor...
Posted: Fri Feb 17, 2017 2:29 pm
by stevieturbo