Hi guys,
I've seen a thread on this previously, but for the life of me cannot find it now.
I'm currently wiring up a VW beetle to run an S40 ecu. I have a look that is ignition only and need to convert it to FI.
Tried to get a new pin into the ecu connector tonight and it didn't want to go in.
Any tips?
Thanks
Paul
Inserting new pins into connector.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Inserting new pins into connector.
you need to remove the lock, the small white bits on the connector move sideways to unlock the housing.
Re: Inserting new pins into connector.
Perfect! That solved the issue. It's the simple things!!
Thanks
Thanks