DTAForum.com - a forum for the DTA ECU

Need a map to get my TU5JP4 NFU started

Peugeot 205
Weight : 830 KG
Compression ratio : 190 PSI
Port Polish Head
Cat Cam 1322705
Lift : 10
Duration : 256
Exhaust Manifolds After Marked 4-2-1
throttle Standard port and polish Size 60mm
air intake : simota racing
Map Sensor : GM 3 Bar
WideBande : AFR 10-20
ATM : 1Bar
And Table Use Map As Load

And Need help in installing a four-wire IDLE Valve

TNX

This should get you started. Just check the MAP scaling is correct.

Thankful .
I will check.
The size of the injectors is 196 cc.