hi all
Im needing some help with my outputs. I've been searching the forum for over an hour with no answers
So I'm running a dta s40pro on my c20let and have the outputs controlling the following-
Aux 2 - turbo valve
Aux 4 - fuel pumps (default)
Aux 5 - fan control
Aux 6 - tacho (default)
My issue is that I want to add a shift light which has now obviously been taken up by my fan control. I use the ecu to give signal to my aftermarket tacho so I cant alter Aux 6 so how do I get the ecu to control the shift light.
I could move my fan control to Aux 4 and use the original Aux 5 for the shift light but then how do i bring my fuel pumps on
Any help would be greatly appreciated
Aux output help
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Aux output help
You've run out of outputs. You will either need to move something off the ECU, or upgrade to an S60.
Re: Aux output help
Or lose the DTA fan control and use a standalone switch in the top hose - I do that to provide cooling after engine off. Damn sight cheaper than a DTA S60 upgrade LOL!
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Aux output help
True, but the S60 is lots better and has logging.katana wrote:Or lose the DTA fan control and use a standalone switch in the top hose - I do that to provide cooling after engine off. Damn sight cheaper than a DTA S60 upgrade LOL!
I'd get the S60....but the fan switch is definitely cheaper lol
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Aux output help
2nd hand S40 prob still worth £400
Re: Aux output help
And a s/hand S60 is £550 - 650! So £150 - 250 against a £20 switch?Rob Stevens wrote:2nd hand S40 prob still worth £400
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Aux output help
I'd still get the S60 lol
Switches don't datalog.
Switches don't datalog.
Re: Aux output help
If i was to upgrade to a s60 would I have to have a map done from fresh or can the map be transferred from my s40Alex DTA wrote:You've run out of outputs. You will either need to move something off the ECU, or upgrade to an S60.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Aux output help
Map will transfer from S40 just fine. But just check it all over any way.
-
- Posts: 81
- Joined: Wed Jan 28, 2015 5:42 am
- ECU Model: S40 Pro
- Distributor: Lotusbits
- Firmware Version: 75
Re: Aux output help
Will the S60 plug into the S40 wiring?