S40 connector plug
-
- Posts: 5
- Joined: Sun Sep 06, 2020 9:54 am
- ECU Model: S40 Pro
S40 connector plug
Looking to add a wideband lambda sensor to my s40 . I cannot separate the ecu plug. I have pressed the long white tab in on the side until it clicks. But it will not come apart, am I missing something?. If I break the connector, will the existing pins be usable in a new connector. Thanks Jamie
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: S40 connector plug
Jamie can you attach a photo so we can make sure we understand best
Thanks!
Thanks!
1992 700RWHP Pump Gas BMW
-
- Posts: 5
- Joined: Sun Sep 06, 2020 9:54 am
- ECU Model: S40 Pro
Re: S40 connector plug
Hi, this is the ecu connector, I am referring to.thanks
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S40 connector plug
The connector doesn't come apart.
Push the thick white tab in.
Then simply push the pin in to the connector until it seats.
Push the two thin white tabs down again to lock the pins in place.
Push the thick white tab in.
Then simply push the pin in to the connector until it seats.
Push the two thin white tabs down again to lock the pins in place.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: S40 connector plug
Top tip is to push pins out too, dont be tempted to pull the wire! You can guess what can happen
-
- Posts: 5
- Joined: Sun Sep 06, 2020 9:54 am
- ECU Model: S40 Pro
Re: S40 connector plug
Thanks for the advice, all sorted now
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S40 connector plug
The wire/pin will pull out.Rob Stevens wrote: ↑Tue Feb 23, 2021 3:56 am Top tip is to push pins out too, dont be tempted to pull the wire! You can guess what can happen
If the crimp comes apart....there needs to be serious discussions with whoever crimped them ! lol ( or didn't crimp as the case may be )
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: S40 connector plug
Splice loom kit from DTA