Limit Revs via button

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
Lars.Christ.Mas
Posts: 1
Joined: Sun Sep 11, 2022 8:01 am
ECU Model: S60 Pro
Distributor: Alons Aurosport

Limit Revs via button

Post by Lars.Christ.Mas »

Hi ,

does anyone know how to setup a rev limiter only active while pushing a button?
I want to use it as a kind of manual launch control:
Push the button, give it full throttle, release clutch, hold button until grip, then release the button and full revs are available.

I hope you know what i mean, could be used as a pit speed limiter in a given gear aswell.

Ecu is a DTA S60, and i have no wheel speed signal going into the ECU.

Thanks for your help!
Best regards
Lars
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: Limit Revs via button

Post by Mr Drew »

In the launch control settings, select limit rpm when button pressed and set an rpm.
Post Reply