OBD port.
-
- Posts: 4
- Joined: Tue Dec 06, 2022 1:21 pm
- ECU Model: No ECU
OBD port.
Evening all, is it possible to wire in an OBD port to a T2, my thought is to have an OBD reader Bluetoothed to my phone to keep a check on pressures, temperatures etc during an event.
TIA
TIA
Last edited by Paul Hassell on Thu Feb 02, 2023 12:58 am, edited 1 time in total.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: OBD port.
Well you can wire it to a 16 pin connector.....
But you will get nothing from it that any generic OBD reader will be able to do anything with.
I think Realdash might be one of the cheapest products out there that might offer something http://realdash.net/index.php
http://www.realdash.net/forum/viewtopic ... 10c5780ac1
But you will get nothing from it that any generic OBD reader will be able to do anything with.
I think Realdash might be one of the cheapest products out there that might offer something http://realdash.net/index.php
http://www.realdash.net/forum/viewtopic ... 10c5780ac1
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: OBD port.
Or perhaps this may work?
https://dtadroid.com/
https://dtadroid.com/
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: OBD port.
dtadroid is only for the S Series
-
- Posts: 4
- Joined: Tue Dec 06, 2022 1:21 pm
- ECU Model: No ECU
Re: OBD port.
Thanks for the replies, it looks like both of those options are for the S series only, I guess a T series option will be released in due course.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: OBD port.
Does the T transmit a different serial stream than the S ?
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: OBD port.
There is no serial stream on the T series.stevieturbo wrote: ↑Wed Feb 01, 2023 1:27 pm Does the T transmit a different serial stream than the S ?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: OBD port.
Realdash can do CAN ?
https://realdash.net/manuals/realdash_can.php
With CAN, almost any dash display should be able to work, or there are guys who do stuff with Arduino to make cheap displays.
https://realdash.net/manuals/realdash_can.php
With CAN, almost any dash display should be able to work, or there are guys who do stuff with Arduino to make cheap displays.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: OBD port.
Never heard of them before, but this seems to be a range of "not as expensive as others" displays....still not mega cheap by any means though
https://turbozentrum.co.uk/Electronics- ... Nchecked_1
https://www.canchecked.de/
https://turbozentrum.co.uk/Electronics- ... Nchecked_1
https://www.canchecked.de/
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: OBD port.
I didn't know RealDash did CAN. Interesting.
CanChecked have been around for about 6 or 7 years now. They have our CAN stream, as we tested it after PMW one year
CanChecked have been around for about 6 or 7 years now. They have our CAN stream, as we tested it after PMW one year