S60 Spark ignition coils

[stevieturbo]

just upload the map, screenshots are annoying.

It appears you may have a cam sensor fitted, so if all sequential settings are ok then the coils should fire.

If they are not, then you can run off crank only and via twin spark, which is not enabled in those screenshots.

Diagnostic display will give info during cranking to see if crank/cam signals are all happy and if sequential etc is active.

[Eifelscholl]

Hello, unfortunately I can only upload it like this. I have a permanent cam error

[stevieturbo]

Waste of time if you cannot provide the info to help assist you.

If you have an inoperable cam sensor for whatever reason, you cannot run sequential injection or ignition. So fix that

In the meantime turn sequential off, turn twin spark mode on and run it like that while you diagnose the cam sensor issue.

[Eifelscholl]

No matter how I turn it on, whether sequential mode or twin spark mode, it always only runs on 2 cylinders. All coils work in the cut test.

[stevieturbo]

so you have turned ALL sequential settings off and tried with twin spark on ?

And uncheck one coil per cylinder.

[Eifelscholl]

Ja genau

[stevieturbo]

Then it should be working.

[Eifelscholl]

Hello, that's exactly what I've tried. that means I don't need a camshaft sensor for the ignition coils?

[stevieturbo]

If you have done exactly what I said, you do not need a cam sensor.

[katana]

I don't know your computer skills but to upload your map just compose the reply then to attach the map file navigate to the DTA folder, then maps, then select the one you want to upload. . . Should be a .map file