would it be possible that when you are in the software on the data log> logging options screen you had the ability to toggle between say three sets of user defined logging parameters. In my case I like to have have the log permanently recording a basic bunch of channels at ten hertz, but say you want to tweak launch or traction control you have to go in and individually select/unselect channels change the log rate etc, then change them back when you are done. Clicking one button and getting your 'default' settings back would be so much easier.
Also the option to disable turbo over pressure protection during and shortly after a flat shift, with my particular setup, using retard not cut as it seems much less aggressive, I have to have the limit set 70kpa over my normal 220kpa boost level to stop it tripping which almost makes it pointless.
Feature Request thread ( make sticky )
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Feature Request thread ( make sticky )
Nice idea. Not short term though.Mr Drew wrote:would it be possible that when you are in the software on the data log> logging options screen you had the ability to toggle between say three sets of user defined logging parameters. In my case I like to have have the log permanently recording a basic bunch of channels at ten hertz, but say you want to tweak launch or traction control you have to go in and individually select/unselect channels change the log rate etc, then change them back when you are done. Clicking one button and getting your 'default' settings back would be so much easier.
No.Mr Drew wrote:Also the option to disable turbo over pressure protection during and shortly after a flat shift, with my particular setup, using retard not cut as it seems much less aggressive, I have to have the limit set 70kpa over my normal 220kpa boost level to stop it tripping which almost makes it pointless.
You've effectively set up an anti lag situation. With the ignition being retarded like that, you're firing at ATDC, so spooling the turbo up massively. Put a turbo speed gauge on if you're interested.
I'd switch back to ignition cut, unless you can reduce the ignition retard enough that you don't get boost spikes but can still shift smoothly.
Re: Feature Request thread ( make sticky )
Is there any chance of more boost control maps? I've been dabbling with a Garrett servo type wastegate actuator in an attempt to get a wider range of control of boost by gear but it really needs more maps to function effectively.
Re: Feature Request thread ( make sticky )
Without sounding obvious - DTA is an 'engine management unit' if you want more sophisticated boost management buy a standalone boost controller?
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Feature Request thread ( make sticky )
There will be no more development on the S Series ECUs apart from one that's been outstanding for about a year.Mr Drew wrote:Is there any chance of more boost control maps? I've been dabbling with a Garrett servo type wastegate actuator in an attempt to get a wider range of control of boost by gear but it really needs more maps to function effectively.
All my time is now taken on the new ECUs.
-
- Posts: 37
- Joined: Tue Aug 02, 2011 2:05 am
- ECU Model: S60 Pro
- Firmware Version: 63
- Location: The Netherlands
Re: Feature Request thread ( make sticky )
The new ecu’s Alex?
Maybe I missed it, but could you spill the beans a bit more as to what is coming?
Maybe I missed it, but could you spill the beans a bit more as to what is coming?
11.06 @ 124.5 mph
'74 VW Beetle turbo S60pro
'74 VW Beetle turbo S60pro
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Feature Request thread ( make sticky )
T Series will replace the S Series imminently.
No serial port, direct USB.
Onboard wideband on all ECUs.
Plus versions will have DBW built in. Knock hardware is included, but the software development is a big job, so that won't be ready for a while.
No serial port, direct USB.
Onboard wideband on all ECUs.
Plus versions will have DBW built in. Knock hardware is included, but the software development is a big job, so that won't be ready for a while.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Feature Request thread ( make sticky )
Woo hoo, and with the introductory discount I feel an upgrade on it's way.
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: Feature Request thread ( make sticky )
That sounds AWESOME Alex. Gives me reason to upgrade... sigh.
1992 700RWHP Pump Gas BMW
-
- Posts: 9
- Joined: Tue Oct 22, 2019 4:08 pm
- ECU Model: S60 Pro
Re: Feature Request thread ( make sticky )
came here to suggest CAN wideband support (ground offset issues) but I guess onboard WB controller is even better