Page 2 of 2
Re: Incorrect rpm values
Posted: Sat Dec 29, 2012 7:54 am
by nikfruit
Stevie,
Can this issue be related to the inhibition of at l u sp.?
I had said in an old topic.
Re: Incorrect rpm values
Posted: Sat Dec 29, 2012 1:50 pm
by stevieturbo
I dont think so. Did you never get the speed issue resolved ?
Re: Incorrect rpm values
Posted: Sat Dec 29, 2012 1:57 pm
by nikfruit
Stevie here is the 100hz log you ask me
Re: Incorrect rpm values
Posted: Sat Dec 29, 2012 3:50 pm
by stevieturbo
I would say that all readings on the log look fine when viewed in E-Race. I dont see anything odd in Excel either. There are some rpm rises when on full boost/load. But they could be a little bit of wheelspin, clutch slip, or just down to the road surface.
I dont see anything strange in that log at all ?
Re: Incorrect rpm values
Posted: Sat Dec 29, 2012 4:33 pm
by nikfruit
I think is the Road surface because the
road i make the tests runs is not very flat.
Re: Incorrect rpm values
Posted: Sat Dec 29, 2012 5:15 pm
by nikfruit
stevieturbo wrote:I dont think so. Did you never get the speed issue resolved ?
No i didn't resolve this issue, actually i never search till now.
Have you an idea....
Re: Incorrect rpm values
Posted: Sat Dec 29, 2012 5:55 pm
by stevieturbo
I cant think what would be causing it.
Did you ever do a log of driving ( 10Hz is plenty ) with all wheel speed parameters being logged ? Basically log as much as possible.
I use the GT101 sensors on mine, and it just works at all speeds with no problems.
Re: Incorrect rpm values
Posted: Sun Dec 30, 2012 5:18 pm
by nikfruit
I'm using the same sensor but only for undriven wheel.