Hello,
Can someone help me sharing information to get the ICS of the Sierra Cosworth working.
I've the DTA S-60 installed on the Sierra Cosworth but can't get the idle valve proper working.
I've attached a print screen with the current settings.
Thanks
Bas.
DTA S60 settings for ICV cosworth
DTA S60 settings for ICV cosworth
- Attachments
-
- DTA.docx
- (110.74 KiB) Downloaded 297 times
-
Roverdose
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: DTA S60 settings for ICV cosworth
is the valve actually working?
the frequency at 100hz seems low, might be worth a look in the future.
id try adding more % in the idle map until you see some results, say 100% all over! if its revving too high you know you can pull some of the valve % out, if it does nothing you have a problem.
Drew
the frequency at 100hz seems low, might be worth a look in the future.
id try adding more % in the idle map until you see some results, say 100% all over! if its revving too high you know you can pull some of the valve % out, if it does nothing you have a problem.
Drew