How much these cost and is there high quality pictures of the latest modell somewhere ?
When the bigger screen modells are ready?
S Dash
-
- Posts: 36
- Joined: Sat Jul 21, 2012 12:33 am
- ECU Model: S40 Pro
- Distributor: Mefmotorsport
- Firmware Version: 77
- Location: The Netherlands
- Contact:
Re: S Dash
I found a couple of picture's of this display.
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: S Dash
so ive finally got my engine running and kind of have the display mounted.
ecu is detected but no data stream.
found a tick box in the software for data stream.
do i need to add anything in the rest of the boxes to get this working properly?
number of header bytes etc?
cheers
Drew
ecu is detected but no data stream.
found a tick box in the software for data stream.
do i need to add anything in the rest of the boxes to get this working properly?
number of header bytes etc?
cheers
Drew
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: S Dash
im obviosly missing something, tick box checked, still nothing.
Drew
Drew
-
- Posts: 96
- Joined: Sat Nov 12, 2011 6:24 pm
- ECU Model: S100 Pro
- Firmware Version: 61
- Location: Montreal, Canada
Re: S Dash
Hey Drew,Roverdose wrote:im obviosly missing something, tick box checked, still nothing.
Drew
I just plugged mine in a few weeks ago, haven't had anytime to mess with it...
Did you get this opening screen when it powered-up?
Simon
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: S Dash
simmilar but not the same, ill go take a pic.
btw it recognises the ecu type and the map i have in there, just no stream.
Drew
btw it recognises the ecu type and the map i have in there, just no stream.
Drew
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: S Dash
on ignition i get this...
doesnt chage with the engine running, change the mode, no difference.
searched the net, setting up an aim display says you need
2 (in header bytes)
208
208 (in the next 2 boxes)
will try that in a mo.
cheers
Drew
doesnt chage with the engine running, change the mode, no difference.
searched the net, setting up an aim display says you need
2 (in header bytes)
208
208 (in the next 2 boxes)
will try that in a mo.
cheers
Drew
Re: S Dash
Actually, yes, for serial stream you need the following;Roverdose wrote:found a tick box in the software for data stream.
do i need to add anything in the rest of the boxes to get this working properly?
number of header bytes etc?
cheers
Drew
Number of header bytes: 4
Header bytes values: 170-85-1-254-0-etc.
But I see that you still have the old firmware, for the advanced stream(old dyno stream), you’ll need to upgrade to the newer firmware(to make it work with the later DTA firmware), I’ll send you a few files with the newer firmware and how to upgrade.
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: S Dash
thank you Marco.
im on v58 atm, might upgrade that later.
cheers
Drew
im on v58 atm, might upgrade that later.
cheers
Drew
Re: S Dash
Then you'll need the update.
I've send you the files.
I've send you the files.