Sorry if this is silly but it Friday night and swear I'm going crazy.
I use a GM 3Bar map sensor and I was attempting to manually load the voltages and PSI. What weird is I save the file. When I save it and reopen it has different numbers than what I just typed. Anyone seen this?
Thanks
Am I dumb - Sensor Scaling
Re: Am I dumb - Sensor Scaling
I've fixed it. I had to manually update them as KPA (change units) then save file. Then change units back to psi then it saved the correct numbers.
Weird but glad its sorted
Weird but glad its sorted
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: Am I dumb - Sensor Scaling
Odd, though good to know. I have entered values before but don't think recall any issues.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Am I dumb - Sensor Scaling
I just clicked 3 bar sensor lol.
Re: Am I dumb - Sensor Scaling
yeah thanks Steve.
Problem is there are 3 different scales for Bosch 3bar map sensors and the default wasn't the same as mine so I wanted to manually upload.
I've attached as an excel file so you can see the variances between the 3
Problem is there are 3 different scales for Bosch 3bar map sensors and the default wasn't the same as mine so I wanted to manually upload.
I've attached as an excel file so you can see the variances between the 3
- Attachments
-
- Map.xlsx
- (10.03 KiB) Downloaded 269 times
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Am I dumb - Sensor Scaling
You said you used a GM 3 bar, not Bosch ?
Re: Am I dumb - Sensor Scaling
Sorry meant GM.
The excel file shows the few different 3 bar GM by part number with the different scaling.
I have part number 16040749
The excel file shows the few different 3 bar GM by part number with the different scaling.
I have part number 16040749