My e48 is reading 220 at closed throttle and 40 at wide open
The rang is supposed to be 0 to 250 with the first ten at minimum reserved to register sensor faults.
So as you can see its backwards. I have an ecu feed an earth and 5v at three of the pins as per the wiring but how do I correct this? Swap earth and 5v?
throttle reading backwards
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: throttle reading backwards
Yes, you can only do this on E48. Later ECU can reverse the operation in the throttle set up window.
Re: throttle reading backwards
Okie doke. Will swap the pins over.
Thanks for your help.
Thanks for your help.