Hi all im going to be adding oil pressure and fuel pressure to s40 ecu with xdash but was wondering about the 5v. Will i have to strip back the heatshrink on the loom and tap into the 5v sensor output ? And will the 5v output cope ok with the extra sensors added to it?.
Thanks
Adding fuel pressure and oil pressure
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Adding fuel pressure and oil pressure
It doesn't matter where you get your 5v from in the loom, likewise the sensor ground, just make a nice job of it, the 5v does have a limit on the amount of sensors it can handle but its probably in the 100's !
Whilst you are at it add oil temp, may as well.
Whilst you are at it add oil temp, may as well.
Re: Adding fuel pressure and oil pressure
Thanks for that much appreciated