Screen resolution
Screen resolution
I have some issues with the screen resolution on Windows 7.
I am running 64 bit Win 7
Screen resolution is 1920 x 1080
For some reason I cannot see the entire text in menus in DTASwin.
I have tried to change screen resolution and also text and menu sizes in Windows, all without sucess.
Do any of you know how to fix this?
I'v tried to upload an image, but I'm not quite sure if I succeeded.
Cheers
Erik
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Screen resolution
Strange, not something I've come across.
Only similar effect is when the window is too small you may not see some numbers, although I've never tried a resolution that high
Only similar effect is when the window is too small you may not see some numbers, although I've never tried a resolution that high
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Screen resolution
Likewise, I've not seen a loss of text like that. I have the same issue as Stevie where you have to manipulate the window size to view all info.
Doesn't help much I know.
Try changing the screen resolution? but that will effect all programs I guess.
Doesn't help much I know.
Try changing the screen resolution? but that will effect all programs I guess.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Screen resolution
My screen is 1920 x 1080 and I don't see that either.
What size is the screen?
What size is the screen?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Screen resolution
I wonder deep in Windows somewhere....have you selected a larger than standard font size for text ?
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Screen resolution
Something odd is going on there. How have you managed to clear all the values from the fields? That shouldn't be possible.
When you installed the software, did you get any warnings or error messages?
When you installed the software, did you get any warnings or error messages?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Screen resolution
Good point
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: Screen resolution
That was my first thought. Looks very odd.stevieturbo wrote:I wonder deep in Windows somewhere....have you selected a larger than standard font size for text ?
I generally use on a netbook with a driver hack to give more virtual height pixels so I can see everything, though that's a different issue again.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Re: Screen resolution
Hi guys,
Thanks for all replies!
I can't remember that I had issues when installing the software, but I can try it again.
As I said, changing the screen resolution in Windows doesn't help.
I can't find any setting in Windows text size that would help, but I'll look further into it.
Regarding values, I am still trying to configure my setup (Volvo 5 cyl) but I do struggle with inputing these fields. However, this is not a stopper at the moment since I am still connecting some sensors and I'm not quite not ready for start-up.
Cheers!
Erik
Thanks for all replies!
I can't remember that I had issues when installing the software, but I can try it again.
As I said, changing the screen resolution in Windows doesn't help.
I can't find any setting in Windows text size that would help, but I'll look further into it.
Regarding values, I am still trying to configure my setup (Volvo 5 cyl) but I do struggle with inputing these fields. However, this is not a stopper at the moment since I am still connecting some sensors and I'm not quite not ready for start-up.
Cheers!
Erik
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Screen resolution
re-install the software, as Sparrow says even ignoring the text issue, there are blank entry fields which should never happen.