Hello,
I want to update my P8 ECU with a S80 ECU.
But i still have my old gdash dashboard.
Is it possible to connect this?
Anyone tried this before?
I 've already tried it with RS232 network but that didnt work. (maybe wrong settings)
At the pinout I see there are two CAN connection. (pin 8 and 16)
Regards,
Olivier
Gdash connection to DTA S80
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Gdash connection to DTA S80
I'd have thought it should work ok ?
Have you the dash RS232 data stream turned on on the software ?
Are you saying you want to use an S80, or you already have tried an S80 ? the post is unclear.
Have you the dash RS232 data stream turned on on the software ?
Are you saying you want to use an S80, or you already have tried an S80 ? the post is unclear.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Gdash connection to DTA S80
GDash baud rate is 9600, S80 is 57600, so they won't work.
Re: Gdash connection to DTA S80
Ok thank you for your responsesparrow wrote:GDash baud rate is 9600, S80 is 57600, so they won't work.
-
- Posts: 17
- Joined: Fri Aug 12, 2011 5:19 am
- ECU Model: S80 Pro
- Firmware Version: 54
- Location: Gloucestershire
- Contact:
Re: Gdash connection to DTA S80
Bit late to the party but back in 2009 Allan emailed me saying that the GDash would work with my S80 with the latest GDash firmware.
Never got around to trying it but he did say it could be done
Never got around to trying it but he did say it could be done
Re: Gdash connection to DTA S80
i have an S40pro, (with old firmware v47) and a Gdash from 2009 installed.
Gdash needs to run latest firmware (if i remember correctly its v17, and is available from DTA), then settings on the software to use rs232 stream etc. It works fine (alan advice us then to do it that way)
Gdash needs to run latest firmware (if i remember correctly its v17, and is available from DTA), then settings on the software to use rs232 stream etc. It works fine (alan advice us then to do it that way)
FIAT Punto HGT SC
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Gdash connection to DTA S80
Thanks for clarifying.