I'm pretty sure when I tried trimming cylinders in batch fire it wouldn't work, to trim cylinders I fitted a cam sensor and went fully sequential. I remember thinking this was strange because I only have 1 injector per cylinder so trimming would work.
Maybe it's disallowed until you your in sequential because some setups will run 2 injectors per output.
One cylinder lean. Injector tweeking ?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: One cylinder lean. Injector tweeking ?
Fair point, it's not something I never tried in batch, but then I was also using more than 1 inj per ecu output so couldnt have trimmed individual anyway
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: One cylinder lean. Injector tweeking ?
Tested it today, it doesn't work in batch. You can fill values in, which is what misled me, but they don't actually get used unless you're in sequential.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: One cylinder lean. Injector tweeking ?
Given the wiring nature of the DTA, it's probably a feature that could be enabled ?sparrow wrote:Tested it today, it doesn't work in batch. You can fill values in, which is what misled me, but they don't actually get used unless you're in sequential.
But it would need a check box for the user to acknowledge it is wired as 1 inj per cylinder, 1 ecu output per injector.
Re: One cylinder lean. Injector tweeking ?
Nice work stevieturbo
Hope Alex put it on his "to do" list
Hope Alex put it on his "to do" list
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: One cylinder lean. Injector tweeking ?
The ECU would only need to know that each output is for a single cylinder. You could still run two injectors per output.stevieturbo wrote:But it would need a check box for the user to acknowledge it is wired as 1 inj per cylinder, 1 ecu output per injector.
However, the devil is always in the detail, and if it was simple, I'm sure Allan would have done it.
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: One cylinder lean. Injector tweeking ?
We know lots of things are simple....but if Allan didnt like it, Allan wouldnt add it lol
Although no idea if that was ever requested
Although no idea if that was ever requested